LED
picture frame.
Bring your artwork into the light.
Print the two shell halves and two back panels, then follow the illustrated guide to fit the LED strip, diffusers and picture.
Uses the same free firmware and lightControl LED iPhone app as the Studio Light.
Light it up.
The LED picture frame shares the Studio Light firmware and companion app. Install the firmware, then set up and control your frame from your iPhone.
Install the firmware
Firmware 1.0.0 for ESP32-C3. Connect your board to a computer with a data USB cable, then open the Studio Light installer in Chrome or Edge.
Get the iPhone app
The free lightControl LED app connects over Bluetooth. Open the app and find your frame under Lights. Wi-Fi is optional and is used for sunrise schedules to keep the time after a power cut.